Brake light switch — replacement

1. Disconnect the electrical connector from the brake light switch (see illustration).

i.1 The brake light switch is mounted to a bracket near the top of the brake pedal

2. Rotate the switch counterclockwise slightly, so it unlocks from its holder, then pull it out of the holder.

3. To install the switch, insert it into its holder (canted slightly counterclockwise as during removal) and push it in until the switch body contacts the bracket on the brake pedal. Rotate the switch 45-degrees clockwise to lock it into place.

4. Plug the electrical connector into the switch.

L
_DV_ send mail

R