Radiator grille — removal and installation

1. Remove the fasteners securing the upper grille close out panel (see illustration).

i.1 Remove the grille-to-radiator support push-pin fasteners

Note: You can read up on how these fasteners are removed in Section 6 of this chapter.

2. There are four lower clips and one clip hidden in each upper corner that need to be detached. Use a flat bladed screwdriver and lift or twist the plastic lever to disengage the clip as you slightly pull out on the grille. (If you don’t apply any outward pressure the clip will just snap back into place.)

3. Pull the grille forward to disengage it from the bumper.

4. Installation is the reverse of removal.