Liftgate (CR-V models) — removal, installation and adjustment
Note: The liftgate is heavy and somewhat awkward to hold — at least two people should perform this procedure.
Removal and installation
1. Open the liftgate and support it securely.
2. Remove the upper trim molding from the liftgate opening and disconnect all wiring harness connectors leading to the liftgate.
3. While an assistant supports the liftgate, detach both ends of the support struts.
4. Remove the C-pillar trim panels, then carefully pull down the rear portion of the headliner.
5. Detach the liftgate hinge-to-body bolts and remove the liftgate from the vehicle.
6. Installation is the reverse of removal.
Adjustment
7. Adjustments are made by loosening the liftgate hinge-to-body bolts and moving the liftgate. Proper alignment is achieved when the edges of the liftgate are parallel with the rear quarter panels and the roof panel.
8. Remove the rear trim panel and adjust the latch striker assembly as necessary to provide positive engagement with the latch mechanism.
9. Finally, adjust the height of the liftgate in relation to the body by screwing the rubber bumpers in-or-out.
