Transaxle mount — check and replacement
1. Raise the front of the vehicle and place it securely on jack stands.
2. Insert a large screwdriver or prybar between the mount support arm and the frame and try to lever the support arm.
3. The transaxle support arm should not move up more than about 1/2 to 3/4-inch within the mount. If it does, replace the mount.
4. To replace the mount, support the transaxle with a jack, remove the nuts and bolts and remove the mount.
Warning: Do not place any part of your body under the transaxle when it’s supported only by a jack.
5. Installation is the reverse of removal.
open all | close all
