1. Release the spring clips, then lift the housing cover and remove the air filter element (see illustrations).
i.1a Flip open the spring clips.
i.1b … then lift the cover up and remove the filter element
2. Inspect the outer surface of the filter element. If it is dirty, replace it. If it is only moderately dusty, it can be reused by blowing it clean from the back to the front surface with compressed air. Because it is a pleated paper type filter, it cannot be washed or oiled. If it cannot be cleaned satisfactorily with compressed air, discard and replace it. While the cover is off, be careful not to drop anything down into the housing.
3. Wipe out the inside of the air filter housing.
4. Place the new filter into the air filter housing, making sure it seats properly.
5. Installation of the housing is the reverse of removal.
